Glove knitting machine common faults and eliminate

One, to take off the needle: refers to the process of glove knitting machine yarn is not import needle hook in falls off form hole phenomenon:http://www.glovemachine.org,jubao06@jubao.cc,tel:86-595-82050111
1, needle tongue is too tight, activity hard. This kind of circumstance, to take off the needle in a longitudinal.
2, brush installation position are improper or wear, cause fabric irregular to take off the needle;
3, yarn mouth improper position, resulting in fabric indeterminate position to take off the needle;
4, yarn mouth synchronous undeserved, glove knitting machine needle hook yarn, yarn mouth and nose joint, cannot too early or too late, or you will cause a big range to take off the needle;
5, yarn tension undeserved. Due to the yarn mouth wear, spring tension is undeserved, brush and fabric contact and so on, cause yarn loose, cause to take off the needle;
6, because day spring tilt, bottom yarn and elastic yarn entanglement.
Second, the repeat hello yarn, the reason is as follows:
1, needle tongue damage;
2, fabric lead the bad and accumulation, pressure needle triangle didn't have enough strength to pin down form normal weave eyes.
3, pressure needle in a higher position, needle don't lead down the needle hook in feed double yarn;
4, weaving process, yarn suddenly coarsening, pressure needle triangle at higher position, forming double feeding;
Three, fabric damage (keyhole or wire drawing) :
1, line tension is too big, density is too small, guide hole plug or yarn entanglement it content, etc. ;
2, finger position narrowing density is too small, knitting needle pass form hook broken. ;
3, double feeding.
Other causes damage (mostly in finger root happen)
1, fabric lead the bad, be forked spindle bar (triangle bar) punctured; glove knitting machine.
2, fork shuttle lever action time improper, in the needle is not under pressure when they enter, punctured fabric
3, fork spindle bar incision of wear bad, will fabric pressure cut;
4, yarn entanglement in the day spring, too much resistance formation of active eye is too small, shuttle lever action of the sizing cut off.
Contacts:Cindy Wen
Skype:sellmachine01
Jubao06@jubao.cc
http://www.glovemachine.org
tel:86-595-82050111